	Podcasts 101
		A podcast consists of two main parts: the podcast media, and the RSS feed. 
		Caster allows you to create both of these components. The media file may be
		any audio, video or other media that you may want to publish. The RSS feed 
		is the soul of your podcast. It is an xml file with a standard set of tags
		that describe all of your content and the feed itself. The RSS feed lets 
		your subscribers know when you have a new issue, contact information, 
		website information, titles, writeups, summaries, descriptions and so on.
		Once a podcast is ready for distribution, it must be sent to any server you
		want where it will be available on the web.
		When you create a new podcast show, you can optionally register with iTunes
		or other podcast discovery services. Once registered the podcast discovery
		services will periodically scan your RSS feed and tell your subscribers a new
		issue is available.
	
		List of sites where you can submit your podcast feed:
	
	
	Using Caster:
		The first step in using Caster is the initial setup of the RSS data. You may
		either import an existing feed or start fresh.
		
		Creating a fresh feed:
			Go to the RSS tab. on the iPhone and iPod Touch, tap on Globals to set the 
			Podcast feed information. on the iPad, this information is set on the right half
			of the screen. Fill in all the fields that describe your podcast. This step only 
			needs to be done once:
				Podcast Name: The name of your podcast.
				Podcast Author: The name of the person in charge of maintaining the podcast media.
				Owner: This is the name of the person or entity that is in charge of the podcast.
				Owner Email: public email address that gets to the owner or representative
				Website: The top level website for the owner of the podcast
				Subtitle: A slogan or sub-text for the podcast name
				Language: language descriptor string
				Copyright: Copyright string
				Webmaster: Name or email of the webmaster
				Image URL: A URL to the image used as the podcast's icon
				Category: General topic for the podcast
				Explicit: Does this podcast generally have explicit content?
				Description: A blurb of text that describes what the podcast discusses or what it's about

		Import a feed:
			Configure the podcast's FTP information and the feed data will automatically be populated.
		
		Creating a new issue:
			In the RSS tab, touch New and start filling out the issue information
				Title: The title or topic of this issue
				Author: The person or group who is presenting this issue
				Number: This is a general index that tells you which issue 
								you are working on. Setting this will change the current issue. If a 
								new number is entered, It will create a new uissue with that index.
								Typically, you do not change this.
				Explicit: Does this issue have explicit content?
				Keywords: a comma seperated list of tags and keywords you want to attach to this issue
				Link: Any link you want to attach to the issue; typically a blog or featured link
				Subtitle: subtext for the title
				Summary: A blurb of text that describes what points were made in the podcast
				Description: typically background information or any text that explains what the podcast is about
				
		The issue list:
			At the bottom of the RSS tab, you will find the issue history list. This will show you 
			what podcasts were recorded, their titles, whether it's published or not, and the date 
			of publish (or attempted publish).
			You may erase any unpublished podcasts by swiping the row and tapping Delete
			When you tap on a row, it will select that issue for editing or review.
			Published issues will don and "OK hand" icon, and the unpublished issues will have
			a "sparkly" icon.
			
		Recording your podcast:
			Tap the record tab
			
			You will see an issue window at the top. It displays your podcast name followed by the issue number.
			then on the next line, you will find the issue title. If the podcast has been published (or attempted publishing)
			The date and time will be deisplayed on the top line as well.
			
			Under the issue window, you will find a VU meter. This shows live volume level for the 
			current bit of audio being played or recorded.
			
			Under the VU meter, you will find the record, stop, pause and play buttons. on the left 
			side of the record button, you will find a recording indicator. This will light up red
			when the podcast is being recorded via the mic. If you stop or pause while recording,
			the audio recorded will be put into its own clip. When you continue recording, it will 
			create a new clip and insert it at the current timestamp.
			
			Under the play and record controls you will find the start and end buttons and the time indicator.
			
			Under the time position controls, you will find the pre-recorded clip insert buttons.
			Caster gives you the ability to merge existing audio, such as music, commercials, PSA's, 
			or any other blurbs into your podcast very easily. While recording, tapping these buttons
			will stop your currently recording clip and start playback of one of the pre-recorded
			clips. You may stop playback by tapping the selected clip again. If the clip finishes on 
			its own, recording will continue. To configure the pre-recorded audio clips, tap the Choose Clips
			button.
			
			Choosing clips:
				For each of the clip presets available, you mai either record a preset via the microphone, Or
				you may select a file you've uploaded to your device via Caster's built-in FTP server.
				
				FTP Server:
					This feature only works in WIFI mode. 
					Tap Start Server. The button will light up red.
					On your favorite FTP client, connect to the IP Address listed at port 2121
					the login name and password are:
						login: anonymous
						password: anonymous
					Once connected, you will be able to send or retrieve any file you see listed.
					Note: the FTP server page must be up for the FTP server to be on. If you exit the FTP
					server page, your transfers will be cancelled and the connection will be closed.
					
					Common ftp clients:
						Mac:
						Linux:
						Windows:
			
			The clip lister shows you all the clip fragments you have in your podcast visually. It shows
			a microphone icon if the clip was recorded and a speaker icon if the clip was a pre-recorded 
			clip. Next to the icon, you will see the clip name, start time, and length. 
			When you tap on a clip, it will set the time to the start of that clip. If the clip is recorded, 
			You will see a detail indicator which will take you to the waveform editor. You may swipe to erase.
			If you tap the Reorded heading above the list, You will be allowed to change the positions of the 
			clips. 
			
			Waveform Editor:
				This allows you to clip chunks of audio from the podcast, copy and paste between clips (and even issues)
				Normalize: adjusts the volume of the clip so that it's not too quiet.
				Trim: removes silence from the start and end of the clip.
				Noise: removes noise based on a selected noise profile.
		
		Publishing:
			Processing:
				The first step in publishing is rendering the media file. This is done by tapping Process Audio.
				This combines all the clips into a single media file.
			
			Local FTP Server:
				You may download the media directly from your device using Caster's built-in FTP Server.
				
			Remote FTP Setup: 
				This information is used to send your podcast data to your website:
					Address: IP address or DNS name for the FTP server. Specify the port number after the ':'. Typically, this is 21
					Username: login name used to connect to the FTP server.
					Password: the password attached to the login name used to connect to the FTP server
					All the following paths must be entered axactly as you see them on any FTP client:
						FTP RSS Path: This is the full path and filename for the RSS file.
						FTP Podcast Path: The full path to the directory where the podcast media goes.
						HTTP Podcast Path: The full HTTP path to the podcast directory
						
			Publish Now:
				This sends the media file and RSS feed file to the server specified in the Remote FTP Setup button.
				It only sends the currently selected podcast issue.
				
			
				